Monthly Release Notes - June 2021

Jump to:

Boldon James


Mac Classifier

Version 3.12.5

June 2021

Enhancements
  • Updated for Microsoft Office 365 16.50 (CSD 00022256, 00022272).

  • Improved support for Unicode visual markings with Microsoft PowerPoint. See Further Information.

SAFEmail

Version 3.9

June 2021

All CSDs fixed up to 3.7 SR6 Update 9 and 3.8 SR2 Update 6 are included in this release.

New Features
  • SAFEmail P772 Custom Form replaced with P772 / MMHS Form Regions

Enhancements
  • Enhanced Error Reporting For SAFEmail Document Manager Errors

  • SAFEmail Label Category Selection Pop-Up Confirmation

Other Fixes
  • Attachment Download Failure Error Not Reported If Document With Non-ASCII Filename Is Not The First Attachment

  • Mishandling Of Semi-Colons In SharePoint Document Filenames When Sending To External Recipients

  • Document Manager Does Not Allow 8-Bit Characters In Document File Names

  • SAFEmail Fails to Read FilePatterns.XML File

  • E-tracker Not Auto-Deleting Delivery Reports And Read Receipts From Inbox

  • Attempting To Reset A Document Security Label On Association Doesn't Work

  • Malformed JSON On Searches That Are Enclosed With Double Quote Characters

  • SAFEmail Administration Tool Options Needs Updating for SAFEmail 3.9

  • Mandate Sign and Encrypt Enhancement

  • Maximized Favourites List Only Lists 6 Entries Before Scrolling Is Required (Previously 16 Entries)

  • Filter Favourites List Does Not Reset When A File Is Selected And The Filter Text Entered Is Then Modified

  • Error During Association Attempt: "JSON Malformed - National Caveats Need To Be A List"

  • When Sending Internal Email With Document Including Previous Associations, Clicking View Container Shows An "Unable To Display File Associations" Error

  • Multi-Valued Text Array Metadata Duplication Between SharePoint Document Attachments In The Set Metadata Dialog

  • Request For The Capability Checker SubmitConfirmExternalDomains Feature To Support Wildcard Entries

  • When All SharePoint Attachments Have A Final Status, The Document Status Dialog Should Be Bypassed

  • Issue With The Order In Which Document Manager's Document Status Dialog Is Displayed For Outlook Meeting Requests

  • Requirement For Outlook Meeting Request Items To Support the SubmitConfirmExternalDomains Capability Checker Feature

  • Requirement To Use The Name 'View File' For The Relevant Button In The Attachment Context Menu And On The Office Ribbon

  • Issue After Setting Mandatory Metadata For One Of Multiple Attachments - All Green Ticks Unexpectedly Set

  • Mandatory Metadata' Warning Message Should Remain Visible When Multiple Attachments Are Selected

  • Version History Incorrect After Setting 'Final' Status During Association For External Attachments

  • SAFEmail Fails To Add Physical Attachments To Emails Sent To Certain External Contacts

  • Repositioning Of 'Status' Metadata Field In Document Manager 'Set Metadata For Attachments' Dialog

  • On Message Submission Externally With Attachment, Can SAFEmail Cater For Setting A 'Final' Status, Then Cancelling The Send?

  • On Message Submission Externally With Attachment, SAFEmail Should Compare The SharePoint Metadata Label Value With The Document Property

  • 'View File' Performance Lag When A Message Attachment Has A Large Number Of Associations

  • Label may be minimized on SAFEmail 3.8 Form

 

 

Back to Top

 

Clearswift


ARgon for Email

Version 5.2.0

Jun 3, 2021

Enhancements
  • IP addresses have been updated to support the use of IPv6, enabling users to accept emails from email servers with IPv6 addresses. The Classless inter-domain routing (CIDR) format will be used to add and display addresses within the ARgon Server.

Other Fixes
  • PDF rendering has been improved, following steganography or redaction changes applied by the ARgon Server.

  • XLSX files were being detected as active content when no active content was present. This has now been fixed.

  • Processing documents such as PDFs and RTFs has been improved, resulting in more efficient detection of active content.

  • PDF detection and processing has been enhanced in this release to correct a number of issues, including the ARgon Server becoming unresponsive.

  • You can now disable XLM macros from being detected, by adding a configuration to the CDA and ZIP format managers. For more information, refer to the online help topic on Sanitization.

  • The gdb and valgrind RPMs can now be removed after product installation. This should be performed using the yum utility in Cockpit Terminal. Please note that these will be automatically reinstalled upon every product upgrade, so the removal process will need to be repeated each time.

Secure Email Gateway

Version 5.2.0

Jun 3, 2021

New Features
  • PhishTank has been enabled under Advanced Phishing Detection as part of spam policy. Advanced Phishing Detection uses the feed of confirmed phishing URLs supplied by PhishTank, providing a second source of phishing detection and complements the existing Mailshell functionality.

Enhancements
  • IP addresses have been updated to support the use of IPv6, enabling users to accept emails from email servers with IPv6 addresses. The Classless inter-domain routing (CIDR) format will be used to add and display addresses within the Gateway.

Other Fixes
  • PDF rendering has been improved, following steganography or redaction changes applied by the Gateway.

  • XLSX files were being detected as active content when no active content was present. This has now been fixed.

  • An Avira antivirus error stating that ‘not all file contents could be scanned’ has been resolved.

  • Processing documents such as PDFs and RTFs has been improved, resulting in more efficient detection of active content.

  • PDF detection and processing has been enhanced in this release to correct a number of issues, including the Gateway becoming unresponsive.

  • You can now disable XLM macros from being detected, by adding a configuration to the CDA and ZIP format managers. For more information, refer to the online help topic on Sanitization.

  • The process of generating SwissSign certificates with Silver license has been improved and now issues certificates successfully.

  • The gdb and valgrind RPMs can now be removed after product installation. This should be performed using the yum utility in Cockpit Terminal. Please note that these will be automatically reinstalled upon every product upgrade, so the removal process will need to be repeated each time.

  • DMARC logging detail now gives sufficient information as to why a message may have failed DMARC.

  • x-msw-jemd-scanning-scores headers were not being added to messages. This was due to RSPAMD engine returning a negative score to an email message. This has now been resolved.

Secure Exchange Gateway

Version 5.2.0

Jun 3, 2021

  • PDF rendering has been improved, following steganography or redaction changes applied by the Gateway.

  • XLSX files were being detected as active content when no active content was present. This has now been fixed.

  • An Avira AV Error stating that not all file contents could be scanned, has been resolved.

  • Processing documents such as PDFs and RTFs has been improved, resulting in more efficient detection of active content.

  • PDF detection and processing has been enhanced in this release to correct a number of issues, including the Gateway becoming unresponsive.

  • You can now disable XLM macros from being detected by adding a configuration to the CDA and ZIP format managers. For more information, refer to the online help topic on Sanitization.

  • The gdb and valgrind RPMs can now be removed after product installation. This should be performed using the yum utility in Cockpit Terminal. Please note that these will be automatically reinstalled upon every product upgrade, so the removal process will need to be repeated each time.

Secure ICAP Gateway

Version 5.2.0

Jun 3, 2021

Enhancements
  • The Lifestyle category has been removed from the default 'Sexually Explicit' web policy route. This improves matching for these categories.

Other Fixes
  • PDF rendering has been improved, following steganography or redaction changes applied by the Gateway.

  • XLSX files were being detected as active content when no active content was present. This has now been fixed.

  • You can now disable XLM macros from being detected by adding a configuration to the CDA and ZIP format managers. For more information, refer to the online help topic on Sanitization.

  • Processing documents such as PDFs and RTFs has been improved, resulting in more efficient detection of active content.

  • PDF detection and processing has been enhanced in this release to correct a number of issues, including the Gateway becoming unresponsive.

  • The gdb and valgrind RPMs can now be removed after product installation. This should be performed using the yum utility in Cockpit Terminal. Please note that these will be automatically reinstalled upon every product upgrade, so the removal process will need to be repeated each time.

  • URL categorization speed has been increased resulting in more efficient performance.

Secure Web Gateway

Version 5.2.0

Jun 3, 2021

Enhancements
  • The Lifestyle category has been removed from the default 'Sexually Explicit' web policy route. This improves matching for these categories.

Other Fixes
  • PDF rendering has been improved, following steganography or redaction changes applied by the Gateway.

  • XLSX files were being detected as active content when no active content was present. This has now been fixed.

  • Processing documents such as PDFs and RTFs has been improved, resulting in more efficient detection of active content.

  • PDF detection and processing has been enhanced in this release to correct a number of issues, including the Gateway becoming unresponsive.

  • You can now disable XLM macros from being detected by adding a configuration to the CDA and ZIP format managers. For more information, refer to the online help topic on Sanitization.

  • The gdb and valgrind RPMs can now be removed after product installation. This should be performed using the yum utility in Cockpit Terminal. Please note that these will be automatically reinstalled upon every product upgrade, so the removal process will need to be repeated each time.

  • URL categorization speed has been increased, resulting in more efficient performance.

Back to Top

 

Core Security


Event Manager

Version 6.6.0.30000

Jun 30, 2021

New Features
  • New actions have been added for the Windows template in Event Manager to detect persistent threats for security-disabled groups management.

  • New actions have been added to the Windows template in Event Manager to detect persistent threats in the creation of unknown/unapproved services or processes.

  • New actions have been added to the Windows template in Event Manager to detect persistent threats for Scheduled Tasks management.

  • Response time in Event Manager and Forensic Analysis grids have been reduced when using assets filtering in the security tab configuration.

Enhancements
  • A new logo for Event Manager and Security Auditor has been applied.

  • Added support for the new Powertech SIEM Agent 4.4 release.

  • New events have been added to Fortigate Assets.

  • “Group by Asset” option added as an Issues Analysis report parameter when scheduling.

  • Refresh Time, Latency and Time Zone default values have been changed for the Amazon Web Services template.

  • Event Manager has improved the throughput of deleting old records during its maintenance process.

  • Installation improved check: If IIS (Internet Information Server) is not installed and we are not able to install it, installation is canceled to avoid unexpected problems.

  • Object Creation, Deletion and Modification actions for objects of type; Function, Index, Stored Procedure, Trigger and View have been added to the Oracle template in Event Manager.

  • User Statements (SQL delete, insert, update) actions have been added to the Oracle template in Event Manager. These require an specific audit activation.

  • It is now possible to create/define assets with newer Oracle versions (12, 18, 19).

Other Fixes
  • Creating an asset in Event Manager with the same name as where it is installed, but in a different case, is now listed correctly in Events Manager and Forensic analysis grids in the Audited system column.

  • The Azure Active Directory Operator is now mapped using the UserId from the original Event instead of the UserKey.

  • Missing translations (English and Spanish) for some event Action/SubAction names in reports have now been added.

  • Within Forensic Analysis, deselecting a "Blanks" value from the Security Control columns; "Security Control Name", "Selection Rule" and "Classification Rule", did not work. This issue has been fixed.

  • A parsing issue with IBMi Authority Failure (AF) for the SIEM Agent integration out-of-the-box template has been resolved.

  • Update Statistics for Orchestrator Engine scheduled every night did not actually update indexes statistics. This has been resolved and a summary is now logged in folder Orchestrator\Orchestrator Engine\logs.

  • Invalid email address was used as the default for the technical contact email in Reports. This issue has been fixed.

  • If Domain or User/Group was changed while editing an User or Group configuration, notifications for this user or group stopped working forever. This issue has now been fixed.

  • Manually created monitors within ThinkServer Configurator for an Advance Database Reader DataSource configured as "Incremental Policy: Indexed" did not retrieve any data. This issue has been fixed.

  • Events Manager Custom DataSources EventLog and DatabaseReader did not retrieve events for an specific subaction if "SubAction Complete Message Parsing" was defined and "Variables Mapping" used a variable with a case different from the one in the regex expression. This issue has been fixed.

  • While using several search boxes there were some "invalid" characters, which caused an error. This issue has been fixed.

  • Sometimes, upgrading could leave Web.config with invalid content in the "staticContent" tag rendering the software unavailable. This issue has been fixed.

  • When saving an alarm or action set, the editing tab is now maintained.

  • It is no longer permitted to change the application Security Administrator during an upgrade and installation only continues if the security administrator password has been verified.

  • Regular expressions and default time format parameters in SWIFT applications Datasources were incorrect. These have been fixed in this release.

  • Objects Action Auditing based reports couldn't be opened when there was only one registry result. This issue has been fixed.

  • Monitoring assets could stop receiving health updates and issues information due to a lock in Smart Console Publisher. This issue has been fixed.

  • Infrequently, Inspector Service could become inaccessible after starting. This issue has been fixed.

  • If Event Manager and Vityl & IT Business Monitoring collects syslog events, the L2Launcher Syslog process could crash due too much memory usage. This issue has been fixed.

  • Some of the oldest scheduled reports were not being correctly launched. This issue has now been fixed.

  • DSNs created for SQL Server Express 2019 now work as expected.

  • Installation or upgrade could sometimes generate an incorrect Web.config resulting in it being unavailable. This has been fixed.

  • An issue with single sign-on has been addressed and now all the applications work without a new login.

  • Security Controls with specific Regulations selected did not use these selections after a refresh. This has been fixed.

  • The SubAction Regular Expression Filter in Database Reader and Windows Event Log Custom Datasource was inaccessible leaving an incomplete configuration. This has been fixed.

  • Using Microsoft 365 Datasources with "Actions and subactions automatic discovery" enabled no longer causes an Event Manager unavailability problem.

  • Security Controls that are loaded during “Orchestrator” service start and fail (due to an unexpected error) result in the “Orchestrator” service not starting. This issue has been fixed.

  • When using Internet Explorer v11, badly aligned check boxes in the Investigate tab for an event have now been repositioned.

  • When editing a “Subaction regular expression filter”, any invalid regular expressions or variables mapping are now detected.

  • Forensic Analysis or Events Manager grids could generate an "Error executing Indexator query embedded in where clause. Details: AccessServer error: Invalid session." error, resulting in the event counts not being displayed. This has been fixed.

  • An error recollecting events in a named instance of an SQLServer with credentials of type User/Password has been fixed.

Back to Top

 

Globalscape


EFT Express

Version 8.0.5.12

Jun 06, 2021

  • Fixed an issue where certain event rule configurations would fail to upgrade to EFT 8.0.5

EFT Enterprise

Version 8.0.5.12

June 06, 2021

  • Fixed an issue where certain event rule configurations would fail to upgrade to EFT 8.0.5

Back to Top

 

IBM Partnership


Backup, Recovery, and Media Services for IBM i (BRMS)

Version: PTF 7.4 SI76515, 7.3 SI76514, 7.2 SI76513

June 14, 2021

Other Fixes

In version 7.2 and later:

  • Issue where the BRMS function used to change the 'from address' on email notifications sent by the BRMS log would not use the updated 'from address' has been fixed.

  • The issue where STRMNTBRM and STRRCYBRM may fail with MSGMCH0603 and MSGRNQ0121 if more than 1000 duplicate volumes are used was fixed.

  • Backups using special value *ALLTEST that resolve to more than 300 libraries may run multiple backup commands instead of a single command has been fixed.

NOTE: Due to the official end of support for IBM i release 7.2 on 04-30-2021, the June 2021 PTF SI76513 is the final BRMS PTF for 7.2.

PowerHA SystemMirror for IBM i

Version 7.4 HA 4.5.1, PTF SI76617 (plus Language PTFs)

June 25, 2021

New Features
  • Switchover and failover progress monitoring support provided with the new command, Display CRG Activity (DSPCRGACT).

  • FlashCopy Automation

    • SVC FlashCopy verifies the replication state for STRSVCSSN if the FlashCopy is at the target side of replication and prompts the user to confirm if replication is not active.

    • SVC FlashCopy verifies the replication state for CHGSVCSSN performing an incremental copy if the FlashCopy is at the target side of the replication and prompts the user to confirm if replication is not active.

    • The new source ASP Action (SRCASPACN) parameter provides the ability to quiesce the FlashCopy production copy automatically.

    • A new target ASP Action (TGTASPACN) parameter provides support for automatically varying on a FlashCopy target ASP.

  • Automated deployment of geographic mirroring

    • Support for automatically generating copy description and/or session names for geographic mirroring when using CFGGEOMIR.

    • The new start indicator to CFGGEOMIR automatically starts the CRG, varies on the IASP, and if necessary, resumes replication.

Enhancements
  • The DLTCAD command has been simplified. It no longer requires the cluster parameter and now contains support for * for the admin domain parameter.

  • Simplified the RMVCLUNODE command. It no longer requires the cluster parameter and the list of nodes in the cluster when prompting on the command.

  • Simplified the RMVCADNODE command to no longer require the cluster parameter, added a new default * option for the admin domain parameter, and provided prompting for the admin domain parameter.

  • The RMVDEVDMNE command has been simplified to no longer require the cluster parameter, and list of the device domains on the DEVDMN parameter when prompting on the command.

Other Fixes
  • Improved retries on SVC SSH failures where the connection is reset.

  • Resolved error where an automated, unplanned failover with Copy Services Manager may fail due to incorrect information from the storage system.

  • Resolves an issue where a locked CRG object could cause the QHASVR job to end when performing a health check.

  • CFGGEOMIR *DELETE now removes both the source and target copy descriptions.

  • Fixed issue with change session for CSM where choice panel with no options would show in some instances when the session was reversed.

  • Improved error message for when a CRG is not inactive when adding or removing data port IP addresses.

  • Resolved an issue when some instances an automatic failover with Copy Services Manager (CSM) sessions may not be initiated.

  • Improved error messages with CFGGEOMIR:

    • Improved error message when the same copy description name is specified for both the source and target copy descriptions.

    • Improved error message when a conflicting copy description already exists.

    • Improved error message when CFGGEOMIR is used and no data port IP address is specified in the CRG.

    • Improved error message with CFGGEOMIR when the operation partially completes.

  • Resolved an error where CFGGEOMIR *DELETE may remove an incorrect copy description when multiple IASPs for a single CRG exist.

  • Resolved an issue that can result in slow performance when performing operations from PowerHA work panels.

  • Improved performance when performing Start CSM Session (STRCSMSSN) on the non-primary node.

NOTE: PTF update SI76617 requires one or more associated language PTFs. To determine if additional languages you have installed in your environment require a requisite MRI PTF, consult the table of language PTFs in the release cover letter at IBM Support.
Version 7.3 HA 3.7.0, PTF SI76565 (plus Language PTFs)

June 25, 2021

New Features
  • FlashCopy Automation:

    • SVC FlashCopy verifies the replication state for STRSVCSSN if the FlashCopy is at the target side of replication and prompts the user to confirm if replication is not active.

    • The new source ASP Action (SRCASPACN) parameter provides the ability to quiesce the FlashCopy production copy automatically.

    • A new target ASP Action (TGTASPACN) parameter provides support for automatically varying on a FlashCopy target ASP.

  • Automated deployment of geographic mirroring:

    • Support for automatically generating copy description and/or session names for geographic mirroring when using CFGGEOMIR.

    • The new start indicator to CFGGEOMIR automatically starts the CRG, varies on the IASP, and if necessary, resumes replication.

Enhancements
  • The DLTCAD command has been simplified. It no longer requires the cluster parameter and now contains support for * for the admin domain parameter.

  • Simplified the RMVCLUNODE command. It no longer requires the cluster parameter and the list of nodes in the cluster when prompting on the command.

  • Simplified the RMVCADNODE command to no longer require the cluster parameter, added a new default * option for the admin domain parameter, and provided prompting for the admin domain parameter.

  • The RMVDEVDMNE command has been simplified to no longer require the cluster parameter, and list of the device domains on the DEVDMN parameter when prompting on the command.

Other Fixes
  • Improved retries on SVC SSH failures where the connection is reset.

  • Resolved error where an automated, unplanned failover with Copy Services Manager may fail due to incorrect information from the storage system.

  • Resolves an issue where a locked CRG object could cause the QHASVR job to end when performing a health check.

  • CFGGEOMIR *DELETE now removes both the source and target copy descriptions.

  • Fixed issue with change session for CSM where choice panel with no options would show in some instances when the session was reversed.

  • Improved error message for when a CRG is not inactive when adding or removing data port IP addresses.

  • Resolved an issue when some instances an automatic failover with Copy Services Manager (CSM) sessions may not be initiated.

  • Improved error messages with CFGGEOMIR:

    • Improved error message when the same copy description name is specified for both the source and target copy descriptions.

    • Improved error message when a conflicting copy description already exists.

    • Improved error message when CFGGEOMIR is used and no data port IP address is specified in the CRG.

    • Improved error message with CFGGEOMIR when the operation partially completes.

  • Resolved an error where CFGGEOMIR *DELETE may remove an incorrect copy description when multiple IASPs for a single CRG exist.

  • Resolved an issue that can result in slow performance when performing operations from PowerHA work panels.

  • Improved performance when performing Start CSM Session (STRCSMSSN) on the non-primary node.

NOTE: PTF update SI76565 requires one or more associated language PTFs. To determine if additional languages you have installed in your environment require a requisite MRI PTF, consult the table of language PTFs in the release cover letter at IBM Support.

Back to Top

 

Powertech


Exit Point Manager

Version 7.27

June 8, 2021

Enhancements
  • *HIDEZEROSUM is now the default behavior for the PNSLOGEXT command when *SHOWZEROSUM is not specified.
  • The ability to synchronize the Exit Program Manager library system ID has been added to accommodate copying Exit Point Manager libraries across systems.
Other Fixes
  • An issue that caused error RNQ0202 when accessing User Rules immediately after activation has been resolved.
  • Options previously displayed erroneously in the Authority prompt of the Capture Memorized Transaction panel have been removed.
  • Interactive activation that includes the *FILESRV exit point no longer fails to refresh QZLSFILE jobs.
  • An issue that could cause all Object Rule Lists to become inactive for a user when deactivating a single rule has been resolved.
  • An issue that could cause error MCH3601 in PNSLOGEXT reports when using *PRIORDAY, *PRIORWEEK, or *PRIORMONTH has been resolved.
  • Missing informational text in the Create Pre-Filter panel has been restored.
  • Missing informational text in the Change Server Function Rule panel has been restored.
  • An issue that caused the Secure Screen monitor PTWRKMGT/PSSMON to return message "Not authorized to user profile" has been resolved.
  • Misaligned colons on the Change Server Function Rule screen have been corrected.
  • Missing commands for maintaining NS User Groups (ADDNSUGRPM, CHGNSUGRP, and CRTNSUGRP) have been restored.
  • An issue that caused missing journal entries in *TFRFCL exit point program LNSR108R has been resolved.
  • An issue that could cause error VLD4003 'User not found' during a Global Rule Facility change with an Exit Point Manager User Group has been resolved.

Back to Top

 

Robot

Robot HA

Version 13.03

June 23, 2021

  • For new installations, user profile RSFSRV password is set to *NONE.

  • INZRSFHA no longer changes DDM TCP authentication method to *USRID.

  • Improved performance for synchronization.

  • Fixed issue with library containing *both and *after images.

Robot Monitor

Version 14.23

Jun 2, 2021

Enhancements
  • Numeric and threshold values no longer have a limit of 2,147,483,647.
  • Stopwatch feature now accounts for Daylight Savings Time.
Other Fixes
  • Fixed issue with blank Home Dashboard when opening Robot Monitor on PC.
  • Fixed issue with incorrect collection type description when Mimix items trigger threshold.
  • Missing History Summary data now appears correctly. Can now handle issues with ASP size data.
  • Fixed issue with no data appearing in the Available Items box when adding a new historical element.
  • MON020R changed to retrieve the disk unit type correctly when multiple records are found.

  • The value *NA will be returned in all adapter metrics if Robot Monitor cannot get the necessary data from the adapter. If the adapter is not found on the node, Robot Monitor will return a value of *NF.

  • VIOS disk adapter port elements now show the valid list of ports when prompted.

Robot Schedule

Version 13.11

Jun 30, 2021

  • Fixed issue with error CPD0020 'Character not valid' on RBTINSTALL.

Tango/04


Vityl IT & Business Monitoring

Version 6.6.0.30000

Jun 30, 2021

New Features
  • A new public API for extracting Vityl real time and availability information has been made available.

  • Auto discovery for Azure App Insights alerts has been added. All potential alert elements are discovered, even if there is no alert.

  • The health of Windows Physical Disks Queue length has been added in this release.

Enhancements
  • A new logo for Event Manager and Security Auditor has been applied.

  • "View your IT & Business Monitoring" link now goes to the current user default view, not to the user's latest selected view.

  • “Max criticalness” and “Issue Substate” report parameters have been added to Issues Analysis reports.

  • Attributes Notify, NotifyAll and NotifyBusiness have been published for Business Services, so they can be used when searching Vityl IT & Business Monitoring Visualization.

  • Installation improved check: If IIS (Internet Information Server) is not installed and we are not able to install it, installation is canceled to avoid unexpected problems.

  • Asset query retrieval of data has been improved when selecting an interval of type "Last" in Vityl IT & Business Monitoring Analysis tabs.

Other Fixes
  • Assets no longer show with an outdated health status in the Vityl IT & Business Monitoring main page if there is an error in module "Orchestrator Idx".

  • Vityl IT & Business Monitoring no longer reports incorrect health status for assets after restarting windows service "HelpSystems - ThinkServer".

  • Autodiscovery with SNMP no longer fails with error: "Exception in MdbOperationsScheduler::svc(). Error: Entity schema does not exist" when creating the discovered asset.

  • Vityl IT & Business Monitoring monitors based on "command execution" could fail with error "Could NOT connect to remote cancellation pipe ..." This issue has been fixed.

  • Vityl IT & Business Monitoring assets could stop receiving health updates and issues information due to a lock in module SmartConsole Publisher. This issue has been fixed.

  • Update Statistics for Orchestrator Engine scheduled every night did not actually update indexes statistics. This has been resolved and a summary is now logged in folder Orchestrator\Orchestrator Engine\logs.

  • Invalid email address was used as the default for the technical contact email in Reports. This issue has been fixed.

  • If Domain or User/Group was changed while editing an User or Group configuration, notifications for this user or group stopped working forever. This issue has now been fixed.

  • Vityl Linux monitors for CPU, Virtual memory and Physical memory could fail in some versions of Linux with error "Header does not match". This issue has been fixed.

  • Manually created monitors within ThinkServer Configurator for an Advance Database Reader DataSource configured as "Incremental Policy: Indexed" did not retrieve any data. This issue has been fixed.

  • The browser Out of Memory error caused when a custom period of 1 second was selected has been fixed.

  • While using several search boxes there were some "invalid" characters, which caused an error. This issue has been fixed.

  • Sometimes, upgrading could leave Web.config with invalid content in the "staticContent" tag rendering the software unavailable. This issue has been fixed.

  • Users permissions and roles in Web SmartConsole are now editable.

  • The issue with the reply message dialog not showing in the SmartConsole Webclient has been fixed.

  • When saving an alarm or action set, the editing tab is now maintained.

  • It is no longer permitted to change the application Security Administrator during an upgrade and installation only continues if the security administrator password has been verified.

  • Clusters health reported an invalid value if there were some nodes in Monitoring error. This issue has been fixed.

  • Monitoring assets could stop receiving health updates and issues information due to a lock in Smart Console Publisher. This issue has been fixed.

  • The Business Services, Business Consumers, Delivery Channels and Business Functions filters in visualization now work as expected.

  • Vityl Linux monitors for CPU, Virtual memory and Physical memory sometimes failed in newer versions of Linux with the error "Header does not match". This issue has been fixed.

  • Some of the oldest scheduled reports were not being correctly launched. This issue has now been fixed.

  • DSNs created for SQL Server Express 2019 now work as expected.

  • All BSM reports are now upgraded during the installation process as expected.

  • Installation or upgrade could sometimes generate an incorrect Web.config resulting in it being unavailable. This has been fixed.

  • An issue with single sign-on has been addressed and now all the applications work without a new login.

  • The Health Status bar in the Analysis Tab no longer disappears when scrolling with the Period dropdown open.

  • When accessing "Issues Analysis" from "Risk Analysis" filters and selections are now inherited.

  • Exporting as CSV for Availability Manager reports is no longer available as an option.

Back to Top