Esend

July 2019

Version R3M60
Other Fixes
  • SAVSPLF causes MCH1001 wen user does not have *ALLOBJ.
  • Creating a new Esend address book entry results in an error: ‘address longer than 99 characters’.

November 2018

Version R03M59
Enhancement
  • Added link to Goanywhere for SFTP with SSH.
  • Provided new control to remove command line and/or individual options from WRKSPLFE screen.
  • EDISTRIB now supports spooled file numbers greater than 9999.
Update
  • Install now sends message when EFWD subsystem is active.
  • Signature has unacceptable spacing between lines.
  • SAVSPLF generates CPF3C33 during creation of new spooled file.
  • ESNDFILE using TYPE(*SPLPC) results in a file with only a control character - no data in the file.

June 2018

Version R03M58
Enhancement
  • When the users default (ESNDUSR) for the SIGN keyword is *YES and the users own signature setting (ESNDSGN) is blank, emails sent by that user will include the *SYSTEM default signature.
Other Fix
  • CPYSPLFDB does not support *LAST for the SPLNBR parameter even though *last is the default.
  • Emailing with EXECUTE without adding TOSTMF corrupts subject in mime note and email does not get sent.

February 2018

Version R03M57
  • On Windows 10, prompting the ESNDMAIL, filling in the parameters and pressing F12 to Cancel, will no longer send email.

December 2017

Version R03M56

Enhancement:

  • ESNDMAIL and ESNDFILE now allow 80 characters for the subject.
  • The system user file ESNDPF is now shipped as txt for the default text file extension instead of wri.

October 2017

Version V3R55

Updates

  • On some systems with DBCS English as Primary language, Sequel generation (EXECUTE command) of PDF documents failed to convert DBCS characters such as Chinese and Japanese correctly. The resulting PDF contained random symbols completely unrelated to the correct pictograph.
  • Robot Alert objects were retired from Esend.
  • FTP fails when the EFTPSECP record specifies *DFT for the port.

April 2017

Version R03M54

No updates for this version.

October 2016

Version R03M52

The following updates are included in this version:

  • Adjust email header to add appropriate white space like:
  • To: "Recipient Name" <recipient email address>
  • Execute or ESNDFILE with recipient list longer than 1000 characters fails with EML0069 ‘Recipient is not valid’. Limit increased to 2000 positions.
  • The distribution rules (ERPTRULES) will ensure that when the email is the same address, just a different case, the email is sent only once.

April 2016

Version R03M50

The following updates are included in this version:

  • WRKSPLFE should work like WRKSPLF with respect to running option 2 CHGSPLFA and prompting.
  • FTP Server entry now allows you to change the sub functions of EPASV and EPORT in FTP.
  • Using WRKSPLFE option K for CPYtoOUTQ has improved performance.
  • The process for handling reply list entries to messages has been changed to remove the use of RMVRPYLE and ADDRPYLE.

September 2015

Version R03M49

No updates for this version.

May 2015

Version R03M48

The following updates are included in this version:

  • Spooled files sent to multiple recipients using a unique distribution rule are not legible.

December 2014

Version R03M47

The following updates are included in this version:

  • EDISTRIB with a *EM test to use email address from a specific position is no longer sending PDF output.
  • An email sent as type *html by EDISTRIB does not have links and tags rendered as proper hyperlinks.

February 2014

Version R03M45

The following updates are included in this version:

  • Changes have been made to improve the ESEND process to support users who override print file output so that ownership is set to the current job rather than QPRTJOB.
  • Resolved issue where emails were not being sent if a spooled file attachment was open elsewhere.
  • Issue resolved where ESEND was unable to send results via secure ftp from V7R1 machine.
  • Error MCH0603 generated when sending last spool file from a job with over 10000 spool files.
  • Added retry loop in PDFSPLFC for EML0023 erroe due to spool file not ready.

The following enhancement is in this version:

  • Change added that allows you to decide whether or not to send a message when invalid recipients are detected. Processing is controlled by the existence of a data area named ESNDNOML in any library in the jobs library list.

June 2013

Version R03M43

The following updates are included in this version:

  • Distribution Rule (EDISTRIB) to create file on IFS created empty file when file name was more than 30 positions.

The following enhancements are included in this version:

  • Email will be sent if at least one recipient is valid, even if others are not.
  • Allow a distribution rule to copy one spooled file to many output queues.

May 2013

Version R03M42

The following updates are included in this version:

  • Accessing the Maintain Address Book option with more than 1,000 entries, produces the error CPF5021 - ‘Incorrect relative record number or field selection’ and RNX1255 - ‘Session or device error occurred in file ESNDDSTD’.
  • Unable to display QZMF journal entries after ESEND extracts them to a file. DSPESNDLOG on the extracted file gives CPF2962 - ‘FMTOPT(*MAP) or FMTOPT(*NOCHK) required for copy’ and CPF2817 - ‘Copy command ended because of error’.
  • RTF output created from a SEQUEL Host Report makes some report lines appear to be intended as format control input that should not be seen. This problem was introduced in R03M39.
  • Distribution rule (EDISTRIB) was not substituting for lower case variables names.

December 2012

Version R03M40

The following update is included in this version:

  • Update of ESEND resulted in loss of EFTPSECP data used for secure FTP.

The following enhancement is included in this version:

  • Authorization code support added for Live Partition Mobility.

October 2013

Version R03M39

The following update is included in this version:

  • When emailing a SEQUEL host report emailed in RTF format, any fields that contains a slash (\) will truncate characters after the slash.

October 2013

Version R03M38

The following updates are included in this version:

  • When a new user, who does not have the User Default Data area in either SEQUEL or ESEND and they run a SEQUEL command to send results in an email, they get CPF4102 ‘File ESNDPF in library *LIBL with member user name not found’.
  • EDISTRIB with a spooled file where every page meets the selection condition of a distribution rule is being skipped with ‘No pages were found matching the criteria to be sent to’.
  • Spooled files in a pending status (*PND) were either skipped or gave an MCH1210 ‘Receiver value too small to hold result’ error.
  • Work with Spooled Files for ESEND (WRKSPLFE) was not checking Group Profile for additional Special Authorities (*SPLCTL) as it should be.

June 2012

Version R03M37

The following fixes are included in this version:

  • When utilizing the PDFSPLF, and specifying page size of *A4, the actual page size is not created consistently.
  • Email requests specifying only a spooled file name (SPLF) and no specific job information generate an MCH1210 ‘MCH1210 unmonitored by ESNDGSA’ message.
  • The process to obtain system IP address of the Using the Email Configuration Assistant for Esend was changed because in some instances, the previous method could fail.

May 2012

Version R03M36

The following fixes are included in this version:

  • CPYSPLIFS was not using the same spool selection rules as ESNDMAIL. So when CPYSPLIFS was used without user or job number and the job name was not unique, the first spooled file was sent, not the one indicated by SPLNBR.
  • When a subject is passed to ESNDFILE that is longer than 60 positions, the command will now continue to process and truncate the subject. This will mimic the ESNDMAIL command.

The following enhancements are included in this version:

  • A new value for PDF in the Esend user defaults (ESNDUSR) will provide better control of PDF output to prevent printing, editing, and copying the PDF file.
  • Option 20 from the Configuration menu now uses ESETUP for the Email Configuration Assistance for ESEND to take you step-by-step through the set-up or troubleshooting steps of emailing from the power i.

April 2012

Version R03M35

The following updates are included in this version:

  • Added Authority Failure entries in the audit journal for ESN815US2.
  • In the ERPTRULES, e-mail addresses entered in lowercase were converted to uppercase in our processing before sending, but should be in the case required by the recipient’s server.
  • When processing the PDFSPLF command, using the *11X14 or *11X17 in the Pagesize parameter, received error CPD0104, Expression not allowed for parameter PAGESIZE.

January 2012

Version R03M34

The following updates are included in this version:

  • When e-mailing a PC file from SEQUEL and the file extension is not specified, the ESNDUSR EXT PC key will not be used.
  • When prompting the DSPESNDJRN command, received an error when pressing F4 on a starting or ending value in the Journal Receiver Range parameter .
  • In rare instances of EDISTRIB, received MCH0603 Array Index error.
  • HTML font generated an incorrect font size name when using font size 1 or 7.

November 2011

Version R03M33

The following updates are included in this version:

  • ESNDEXEC failed to return any spooled files when the special value *ALL was used for the Maximum Returned Spools setting on the command.
  • The ESNDFILE command with an FTP request didn’t automatically create subdirectories if they didn’t exist.

October 2011

Version R03M32

The following updates are included in this version:

  • Reversed a change made in R03M31 after learning that V6R1 does not include the QTCP/QTMHCGI service program. All customers will be expected to have the QHTTPSVR library installed.
  • An additional change was made to ensure that e-mailing the *LAST spooled file would select the appropriate last spooled file in all cases.

September 2011

Version R03M31

The following updates are included in this version:

  • Pressing F4 on EFTPLST when there are no server profiles ended with error RNQ1255, Session or device error.
  • An e-mail request gave error MCH3401,Cannot resolve to object QHTTPSVR. Not all customers have the QHTTPSVR library, which supplies a newer service program QZHBCGI that SEQUEL was using for writing to STDOUT. The earlier service program, QTCP/QTMHCGI provides the same STDOUT functionality and is expected to exist on all systems.
  • ESVER gave error RNX0100, length or start position is out of range for the string operation, when the company name was between 38 and 40 positions.
  • On systems with lots of spooling activity for a user when the e-mail request specifically named the job rather than using JOB(*), ESEND would randomly include spooled files that had been printed or deleted before the list was compiled, causing the sort order of the list to be inaccurate.

The following enhancements are included in this version:

  • Forward Rules Maintenance (EFWDRULES) was further improved to provide control of the status of the spooled file after sending. A new value of *SAVE was added.
  • The ESEND Plug-in is now compatible with Client Access V6R1 and V7R1.

August 2011

Version R03M30

The following enhancement is included in this version:

  • The status of a spooled file sent by a forwarding rule is now SAV instead of RDY.

 

Back to Product Index

 

Copyright © HelpSystems, LLC.
All trademarks and registered trademarks are the property of their respective owners.
Last Published: 201912051020